|
|
Post by DemolitionMissions on Mar 11, 2012 19:18:44 GMT -5
I would love to see some pictures or designs that you guys have made for a homemade shifter on a FWD compact. My current column shifter broke the cable when the engine mounts all broke and the engine jumped around. Right now I can only shift going from Park towards Drive. The cable will not work if I try to shift it back through the gears. Basicly the cable only pulls, not push.
Any ideas are appreciated.
|
|
|
|
Post by -KNAPPY- on Mar 16, 2012 22:18:47 GMT -5
i would build a floor shifter and run the cable to it with a cable holder thing like on the brakes of a bicycle, then run stops for drive and reverse so you dont snap the cable..... thats a way i could look at it.... sorry if it dont help lol but hey, i tried lol
|
|
jull
Pulled Onto Track.
Posts: 8
|
Post by jull on Mar 19, 2012 13:07:36 GMT -5
I used an all-thread on the VW I derbied this year. It was a simple push/pull shifter and it bolted right on the pivot on top of the transmission. It was a field repair because the cable snapped right after my last hit.
|
|
