|
|
Post by grimreaper77 on Dec 20, 2011 20:50:31 GMT -5
need tips fast  |
|
kizzire
Pulled Onto Track.
Posts: 12
|
Post by kizzire on Dec 20, 2011 23:26:39 GMT -5
build just like lumina shorten the crush boxes at front where bumper mounts and hardnose it
|
|
Vito324
Pulled Onto Track.
Bad Company Motorsports
Posts: 16
|
Post by Vito324 on Dec 21, 2011 11:16:48 GMT -5
Prebend the a$$end, get it pointed up. Beat where the spare tire used to be up towards the deck lid. And if its allowed, crease the holy hell out of the car. Makes the a$$end alot stronger.
|
|
|
|
Post by grimreaper77 on Dec 21, 2011 16:43:38 GMT -5
thanks.. i was also wondering about a bumper for it any suggestions? ;D
|
|
kizzire
Pulled Onto Track.
Posts: 12
|
Post by kizzire on Dec 21, 2011 22:22:34 GMT -5
just a hard bumper one tht wont bend
|
|
rage
Pulled Onto Track.
Talk sh*t get hit
Posts: 6
|
Post by rage on Dec 22, 2011 12:19:34 GMT -5
If u can get away with it take the front fenders off and put plates over the holes (crumple zones) and put the fenders back on (use nuts and bolts not stock clips) helps alot. Chain or weld the motor mounts solid and thats a way we found to not drop axles. If I think of more I'll post for u. I'm not like some ppl I'll help everyone as much as I can.
|
|
|
|
Post by grimreaper77 on Dec 22, 2011 18:47:27 GMT -5
thanks alot its realy appreaceated
|
|
|
|
Post by grimreaper77 on Dec 23, 2011 12:50:56 GMT -5
heres the pics    very low miles very clean except for some rust on frame and a hole in the subframe in the bck |
|
